Best answer: Yes! Properly washing and curing resin 3D prints is crucial, and the Anycubic Wash and Cure V2 is an inexpensive way to handle the messy reality of resin 3D printing. With a 3.5l Isopropyl Alcohol tank and a UV turntable, it takes a lot of the fuss out of resin post-processing.
Filament 3D printed miniatures don't need to be washed, but you should clean up any excess plastic. For resin 3D printed minis, you want to wash them as part of your normal post-processing, either with isopropyl alcohol or soap & water for water washable resin. Use a wash & cure station or an ultrasonic cleaner.
After calibrating your resin printer you may need up to 8 hours per print and you may be able to print only 4 models at a time, sometimes even less. Some resin printers can do this in less time, say 2-4 hours. But a rule of thumb is that the greater the quality of the print, the longer it will take on a resin printer.
Resin can be reused, but be careful when putting it back into the original bottle if you want to avoid cross-contamination. Sadly, it can't be melted and reused again like you with a filament extruder!
Fully hardened and cured resin can be safely disposed of. In the case of structural supports made by the printer during the build, these can be simply thrown away. However, if excess hardened or semi-cured resin leftover can't be reused, it must be handled with care.
Most newer epoxy resins, which contain less epichlorohydrin, do not seem to cause cancer in animals. Diaminodiphenyl sulfone (DDS), a curing agent in some epoxy resin systems, is carcinogenic in laboratory animals. Certain glycidyl ethers used in epoxy products cause genetic mutations in laboratory animals.
Working with or exposure to certain epoxies or resins could increase your chances of having fertility problems, miscarriage, stillbirth, or a baby with birth defects. Here, you can learn more about these chemicals and what you can do to reduce your exposure for a healthier pregnancy.
Prolonged breathing of highly concentrated epoxy vapors can cause respiratory irritation so wear a respirator mask to be safe!
Paper, plastic, fabric, metal, clay, wood, natural elements, glitters and powders, and any combination of these elements work well. Things that contain moisture should be avoided, for example, fresh flowers and leaves. The water will react with the resin, turning the leaves and petals brown.
Repeated skin contact with resins and hardeners may also cause chronic contact dermatitis, which is usually milder but longer lasting. If left untreated for long periods it can progress to eczema, a form of dermatitis that can include swelling, blisters, and itching.
What are SLA Printers good for?SLA is famous for building parts that are cosmetically superior to FDM due to the laser t...
How do you finish SLA parts?SLA basic finishing steps.Washing—soaking and moving parts in solvent.Removing parts from th...
Can SLA resin be reused?This resin can be reused, so definitely put it back into its container. Open up the container, a...